Monday, March 7, 2011

Lifting bolts hole design in injection mold

Plate transfer process occurs during the machining and assembly of mold, both for the cavity and mold base plate, especially for the plate with a weight greater than 20 kg, threaded hole necessary to facilitate the transfer process. cause may be in a mold plate having a various of machining processes with different types of machines. Base on position of hole the type of lifting bolts can divided became two, perpendicular to face, and parallel with face of plate.
perpendicular to face
beside transfer process, lifting bolts also important for lift out cavity insert from mold base, flat wide plate usually use magnet to lift from one machine to another machine or station, but if shape of plate doesn’t flat it need bolts hole to attach eye bolts, then use crane that connected to eye bolts for lifting the mold base plate or cavity plate.



Parallel with mold face.
Especially for mold base, this hole must available because transfer mold base usually use eye bolt that connected to crane, for mold base plate that use horizontal machining also use this hole to connected with crane, picture below shown mold base with metric bolt hole and eye bolts ready for transfer with crane





8 comments:

Really good articles on this blog. This is my first time visiting but I will add this to my reading list!

Cheers-
Beck (Webmaster)
Injection Molding Machines

Environmentalists and the people around the world should realize the plastics when handled with proper care can be as useful as nuclear energy. If the citizens understand their responsibility and act accordingly and help recycling of plastics then there will be no need for the slogans against plastics. Plastic bag manufacturers on their part have the duty to maintain the standards prescribed by the governments. In most cases governments of the world have been able to make manufactures of plastic bags comply with the international standards.

Distance Calculator

It's nice blog and thanks share with us .........we manufactures High Precision CNC turned components

This was seriously difficult to follow and understand. For a technical blog, I would have appreciated and expected better grammar.

Eyebolts can bend or break when side loads, shock loads, or swaying is present during lifting a mold. An even better way of lifting heavy items is using a Hoist Ring that allows for 360 degree swivel and 180 degree pivot. Always have your tapped thread depth in the item to be lifted at least 1.5 times diameter of thread. For softer metals use 2 times the diameter of thread for tap depth.

This comment has been removed by the author.

yeah i agree so nice,
i recommand it to my friends and i,ll be back again and again visit Dies and mould manufacturers in india for more info.