Tuesday, June 17, 2008

Straight Type Cooling for Cavity

Basically cavity system cooling can divide into two type
1. straight type
2. Circular type

straight type system, usually have in and out of water pipe in not same side of mold or cavity. look at picture below

although the pipe that cool of insert part doesn't straight, but if inlet and outlet cooling fluid is not in same side we can consider that those type of cooling is straight. red color pipe indicate inlet and blue color pipe indicate outlet.

second picture below is still same with previous but this picture include the cavity block

yellow part at each side is plug to prevent unwanted flow of cooling, pink block at the center is core insert part. with attach to core block using bolt. Block with blue color is core block before inserted to mold base.